Can a Rubber Sole Shoe Be Repaired: Tips When Repairing a Rubber Sole Shoe

Yes, you can repair rubber sole shoes. If you are uncomfortable fixing the shoes, consider bringing them to a cobbler or shoe repair shop. They will assess the damage and determine the best repair method. This is usually a very affordable process and doesn’t require elaborate restoration. 

Keep in mind that it is impossible to repair all types of damage, and in some cases, it may be more cost-effective to replace the shoes rather than repair them.

Materials to Repair Rubber Sole Shoes


Shoes are an essential part of any wardrobe and are often worn for long periods. That’s why it’s necessary to keep them in good condition by resolving them regularly. To do this, you’ll need the SoleMaster platform. This machine uses heat and pressure to repair the shoes’ heel, footbed, and internal structure. This ensures that your shoes are fit for use again and stay in good condition over time. 

As a result, the entire process takes about two hours, and you can get your shoes back within a few days. So go ahead and keep your footwear in good repair – it’ll save you time and hassle in the long run!

Super Glue

Super glue can bond very strongly to plastic and rubber surfaces, making it ideal for repairing shoe soles, and glue bonds firmly to plastic and rubber surfaces, making it suitable for repairing shoe soles. 

Additionally, superglue is non-toxic and has a long shelf life, making it an excellent choice for repair projects. So, next time your shoe shows signs of wear and tear, don’t hesitate to reach for a bottle of super glue.

Gorilla Glue

When it comes to shoe repair, there’s no shortage of adhesive options. However, when it comes to Gorilla Glue, it’s a popular choice for a reason. It’s solid and practical, making it a good choice for shoe repair on various surfaces. However, be aware that it’s inappropriate for soft shoes or other sensitive items. 

If you decide to go ahead with the repair, follow the instructions carefully to avoid damage or disaster. With that in mind, don’t hesitate to pick up a bottle of Gorilla Glue at your nearest store or online retailer!

Flex Seal

You can repair the crack or tear with Flex Seal. This adhesive sealant effectively repairs cracks and tears in shoe soles, scuff marks, and other minor damage. Apply the glue in thin layers to allow it time to dry properly. 

Flex Seal is also effective at repairing scuff marks and other damage on the surface of rubber sole shoes. Be sure to use Flex Seal sparingly – too much will cause shoes to become brittle and difficult to wear. So, don’t hesitate to repair those shoe soles in no time!

Repairing a Shoe Sole

Prepare Materials

You’ll need the correct tools and materials to repair a shoe sole. For example, you’ll need a photocopy or drawing of the damaged area, a heat gun or oven, glue, and the original shoe sole. If the rubber sole has a tear or hole, you will need a patch to cover it. You can use a patch made of rubber or a patch made of a material such as leather or canvas.

You will also need sandpaper to rough up the surface of the rubber sole and the upper part of the shoe to create a better bond, while you can use a scraper or knife to remove any dirt, debris, or old adhesive from the surfaces that will be bonded.

Replacing a Worn-Out Sole

If the sole of your shoe is completely worn out, it needs to be replaced. In some cases, the rubber might also need to be replaced, as this will depend on the type of shoe. Therefore, it is essential to keep in mind the size and fit of your shoes when making a purchase – sometimes, they can go even further up than usual if they need to be fitted correctly.

Always take care of your shoes, and they will last much longer! By following these simple tips, you’ll prolong the lifespan of your footwear and enjoy them for years to come!

Reattaching a Loose Sole

If your shoe sole falls off, it is essential to take steps to fix the problem as soon as possible. Follow these easy steps:

  • Check if there is any debris stuck between the shoe and the sole. If there isn’t, use a prying tool to remove any obstruction found and then hammer in new nails with a nail gun or by hand.
  • Once removed, check for glue residue on either side of the shoes’ tread area (near where you would insert your foot). Per WikiHow, clean this off using acetone before attaching a new sole with adhesive or rivets/nails provided in the kit.

Filling Holes

If your shoe is starting to come apart at the seams, it’s time to repair or replace it. Depending on the hole size, you can try a few different methods. Use a needle and thread to patch up the fabric for smaller holes. Make sure that you clean and dry the area before stitching up so that moisture doesn’t cause future problems. 

You will need to buy a new pair of shoes for bigger holes. Make sure that you take care in cleaning and drying the old ones so as not to damage them further in shipping or during installation later on down the line. Finally, ensure your stitches are strong enough to not tear away at this critical part of footwear over time!

Reminders When Repairing Shoe Sole

You May Use a Cobbler

A cobbler can replace rubber soles on shoes, but he will usually charge a fee for this service. Cobblers can fix rubber soles by patching holes, adding new layers of rubber, or even replacing the soles entirely if necessary. The cobbler will first assess the condition of the rubber soles and determine the best course of action to take to repair them. 

It’s essential to ensure that the adhesive used by the cobbler is strong enough – if it fails, you could end up with a new pair of shoes that are completely unusable. So, if your shoe needs repair, consult a cobbler. They will be able to help you out and restore your footwear to its former glory.

Cracked Rubber Soles Can Be Repaired

There’s no need to go out and buy a new pair of shoes when you can repair a cracked rubber sole! You can use several methods to improve a cracked rubber sole. Depending on the severity of the crack, glue or cement may be used to fix it. 

It is often possible to repair cracked rubber soles on shoes, but the feasibility of the repair will depend on the extent of the damage and the type of rubber used in the soles. 

In some cases, you can repair small cracks in rubber soles by patching the affected area with a new layer of rubber. This can be done using a rubber patch or applying a compound directly to the crack. If the gaps are too large or there is extensive damage to the soles, it may be necessary to replace them entirely.


Depending on the type of boot, a repair can cost anywhere from $10 to $50. The bootmaker will need a set of your shoes and the new soles, and they will usually repair them in-house. If you’re outside of the U.S., getting your boots repaired may be more expensive because of the added shipping costs. 

So, if you’re considering having your boots resolved soon, you must first research the costs involved. And if you’re not regularly wearing your shoes, it might be a good idea to retire them and store them instead – this will save you money in the long run.

More severe cracks may require the replacement of the entire sole unit. So, don’t be afraid to bring your shoes in for repair – it might save you a lot of money in the long run.